Connecting Method G - Connection Of Extension Block To Input/Output Powered Extension Unit - Mitsubishi FX3U SERIES User Manual

FX Series Programmable Controllers
3U
User's Manual - Hardware Edition
8.7.8 Connecting method G - connection of extension block to input/output powered
extension unit
This subsection explains the procedures for connecting an input/output extension block to an input/output
powered extension unit.
1
Remove the extension connector cover (A in
the right figure) on the right side of the input/
output powered extension unit.
2
Connect the extension cable (B in the right
figure) from the extension block to be added
(right side) to the extension connector of the
input/output powered extension unit.
• When connecting FX
SET or FX
3U
unit" as the unit.
• When connecting FX
1RM(-E)-SET or FX
with the supplied extension cable or the optional extension cable.
- For FX
2N
extension cable FX
- For FX
2N
3
Fit the extension connector cover (A in the right figure).
146
-10GM, FX
2N 2N
-1PSU-5V, read "input/output powered extension
Series input/output powered extension unit, FX
2N
-1PSU-5V, connect the unit to be added (right side) and the existing unit (main unit)
3U
Series input/output powered extension unit, FX
-30EC or FX
0N
-10GM or FX -20GM, the extension cable FX
2N
8.7 Connecting Methods for Main Unit and Extension Devices
-20GM, FX -1RM(-E)-
2N
2N
-65EC can be used.
0N
-GM-65EC can be used.
2N
8 Installation In Enclosure
-10GM, FX
2N 2N
-1RM(-E)-SET or FX -1PSU-5V, the
3U
A
B
2
-20GM, FX -
2N