Precautions When Using Gpp Function Software Packages And A8Pue Peripheral Devices Which Are Not Compatible With Anu, A2As - Mitsubishi MELSEC-A A2USHCPU-S1 User Manual

2. SYSTEM CONFIGURATION
2.2.3 Precautions when using GPP function software packages and A8PUE peripheral devices which are
not compatible with AnU, A2AS
When starting with GPP function software packages not compatible with the AnU, A2USH-
S1, A2US, A2AS(S1), A2AS-S30 (starting with the PLC model name "A3A ", "A2A" or
"A3H") or a A8PUE peripheral device (containing A7PUS), the usable device ranges are
limited as follows.
(1)
Item
Instruction (sequence/basic/
application/dedicated)
Program capacity
Number of I/O device points (X/Y)
M, L, S relay
Link relay (B)
Timer (T)
Counter (C)
Data register (D)
Link register (W)
Annunciator (F)
Index register (V, Z)
Expanded comment
Latch (power failure compensation)
range
I/O assignment
(1)
(2)
Usable device range
(a) For the A2USHCPU-S1, A2ASCPU-S30
AnACPU-compatible module
Modules whose PLC model for
system FD start-up is "A3A"
A maximum of 30k steps can be used for the main program.
X/Y0 to X/Y7FF can be used.
(X/Y800 to X/Y1FFF cannot be used.)
M/L/S0 to M/L/S8191 can be used.
B0 to BFFF can be used.
(B1000 to B1FFF cannot be used.)
T0 to T2047 can be used.
C0 to C1023 can be used.
D0 to D6143 can be used.
(D6144 to D8191 cannot be used.)
W0 to WFFF can be used.
(W1000 to W1FFF cannot be used.)
F0 to F2047 can be used.
V, V1 to V6, Z, Z1 to Z6 can be used.
Max. 3968 points
The device range shown above can be latched. The device range shown above can be latched.
Possible to register occupied I/O
points and module model names.
The device range other than listed above is the same as that of A2USHCPU-S1,
A2ASCPU-S30.
Refer to the operation manual of each peripheral device for available functions.
Modules whose PLC model for
A8PUE
system FD start-up is "A3H"
All instructions can be used.
(X/Y800 to X/Y1FFF cannot be used.)
(M/L/S2048 to M/L/S8191 cannot be used.)
Unusable (Used on the system)
–
Number of I/O occupied points can
–
2 - 10
A3HCPU-compatible module
X/Y0 to X/Y7FF can be used.
M/L/S0 to M/L/S2047 can be used.
B0 to B3FF can be used.
(B400 to B1FFF cannot be used.)
T0 to T255 can be used.
(T256 to T2047 cannot be used.)
C0 to C255 can be used.
(C256 to C1023 cannot be used.)
D0 to D1023 can be used.
(D1024 to D8191 cannot be used.)
W0 to W3FF can be used.
(W400 to W1FFF cannot be used.)
F0 to F255 can be used.
(F256 to F2047 cannot be used.)
V and Z can be used.
(V1 to V6, Z1 to Z6 cannot be used.)
be registered.
A7PUS
–
–