Fx 2N -8Eyr, Fx 2N; 16Eyr (Relay Output); Product Specifications - Mitsubishi FX3U SERIES User Manual

FX Series Programmable Controllers
3U
User's Manual - Hardware Edition
16.10 FX -8EYR, FX
2N

16.10.1 Product specifications

The generic specifications are identical to the main unit specifications.
For external wiring, refer to the following chapter.
1. Power supply specifications
Item
Product type
Rated voltage
2. Weight and Other specifications
Item
MASS (Weight)
Other
3. Output specifications (Relay output type)
Item
Output points
Connection unit
Output unit
External power supply
Output circuit insulation method
Indication of output operation
Maximum load
Open circuit leakage current
Minimum load
Response time
Output circuit diagram
314

-16EYR (Relay Output)

2N
24V DC (supplied from main unit and input/output powered extension unit)
• The extension cable is already connected to the extension block.
• Accessories: Label for indication of input/output number
• The DIN46277 rail (width: 35 mm (1.38")) or direct installation.
Supplying power to the relay coil will light the LED indicator lamp on panel.
The total resistance load current per common should be as follows:
Resistance
load
• 4 output points/common: 8A or less
• 8 output points/common: 8A or less
Inductive load
OFF→ON
ON→OFF
16 FX2N-8/16E*-*(Input/Output Extension Blocks)
16.10 FX2N-8EYR, FX2N-16EYR (Relay Output)
→ Refer to Section 4.1 for generic specifications.
→ Refer to Chapter 12 for output wiring.
FX -8EYR
2N
FX extension block
2N
FX -8EYR
2N
0.2 kg (0.44lbs)
FX -8EYR
2N
8 points
Vertical terminal block (M3 screws)
Relay
250V AC 30V DC or less
Mechanical insulation
2 A/point
80 VA
→ For the product life, refer to Subsection 4.4.2.
→ For cautions on external wiring, refer to Subsection 12.2.4.
5V DC, 2 mA (reference values)
Approx. 10 ms
Approx. 10 ms
Load
Y
Fuse
COM
DC power
supply
Load
Y
Fuse
COM
AC power
supply
A common number applies to the
FX -16EYR
2N
FX -16EYR
2N
0.3 kg (0.66lbs)
FX -16EYR
2N
16 points
−
of [COM ].