Input/Output Cable • Input/Output Connector • Power Cable; Power Supply Unit; Programming Tool - Mitsubishi FX3UC SERIES User Manual

FX Series Programmable Controllers
3UC
User's Manual - Hardware Edition
*4. A power supply for the input circuit is required when connected to the FX
The current consumption is shown in the table below.
FX
3UC-
FX -16EX-C
2N
1.4.10 Input/output cable • Input/output connector • Power cable
Classification
Input/output
cables
Input/output
connector
Power cable

1.4.11 Power supply unit

Model name
FX -20PSU
2N

1.4.12 Programming tool

The following programming tool supports FX
For inapplicable programming tools and versions, refer to Appendix A-2-2.
N
Model name
GX Developer
44
MT/D, FX 32MT-LT, FX
3UC-
Model name
FX-16E-500CAB-S
FX-16E-150CAB 1.5m(4'11")
FX-16E-300CAB
FX-16E-500CAB
FX-16E-150CAB-R 1.5m(4'11")
FX-16E-300CAB-R
FX-16E-500CAB-R
FX-A32E-150CAB 1.5m(4'11") Flat cable (with tube). The end on the PLC side is provided
FX-A32E-300CAB
FX-A32E-500CAB
FX -I/O-CON 10-piece set Input/output connector for flat cable
2C
FX -I/O-CON-S 5-piece set Input/output connector for bulk wire for 0.3 mm
2C
FX -I/O-CON-SA 5-piece set Input/output connector for bulk wire for 0.5 mm
2C
FX -100MPCB 1m (3'3")
2NC
FX -100BPCB 1m (3'3")
2NC
FX -10BPCB1 0.1m(0'3")
2NC
Description
24V DC power supply
Version 8.13P or later of SW D5C-GPPW-J and SW D5C-GPPW-E supports FX
Although versions prior to 8.13P can be used for programming by selecting FX2N(C),
restrictions apply.
For details, refer to Appendix A-2-2.
Power Supply Voltage
EX 24V DC
2NC-
24V DC
5m(16'4") Bulk wire
Flat cable (with tube). Both ends are provided with 20-pin
3m(9'10")
connectors.
5m(16'4")
Round multicore cable. Both ends are provided with 20-pin
3m(9'10")
connectors.
5m(16'4")
with two 20-pin connectors, and the end on the terminal block
3m(9'10")
side is provided with an exclusive connector. 1 common
5m(16'4")
terminal for 32 input/output points
Power cable for main unit
Input power cable for FX
Input power crossover cable for FX
blocks
Drive power supply
100V AC to 240V AC
Series PLCs.
3UC
Description
1.4 List of Products
-16EX-C.
2N
Current Consumption
Description
series input extension blocks
2NC
series input extension
2NC
Current Capacity DC
24V DC 2A
1 Outline
48mA
160mA
2
[AGW22]
2
[AGW20]
.
3UC