Cautions On Use; Selection Of Connection Cables, Connectors And Terminal Resistors; Selection Of Cables; Selection Of Connectors - Mitsubishi FX3UC SERIES User Manual

FX Series Programmable Controllers
3UC
User's Manual - Hardware Edition
9.3.3

Cautions on use

1. About equipment for CC-Link
Equipment for CC-Link cannot be connected to the CC-Link/LT system.
2. About installation
For the installation conditions of the power adapter (dedicated power supply) and remote
module, refer to the appropriate instruction manual. Install each of them correctly.
9.4

Selection of connection cables, connectors and terminal resistors

For the latest information on the connection cables, connectors and terminal resistors, refer to the homepage
of the CC-Link Association or catalogs (issued by the CC-Link Association).
9.4.1

Selection of cables

Connection cable
CC-Link/LT dedicated flat cable
VCTF cable
High flexible cable
9.4.2

Selection of connectors

The table below shows the specifications of the VCTF cable connector and high flexible cable connector.
Connector
Dedicated flat cable connector
VCTF Cable Connector
High Flexible Cable Connector
*1. The color of the body is light-blue
9.4.3

Selection of terminal resistors

Use the CL9-TERM (gray). When only dedicated flat cables are used in the system, the CL9-RYVK (black) is also
available.
Make sure to use terminal resistors that have the same model name on both ends of the trunk line.
9 CC-Link/LT Built-in master ability (Only FX3UC-32MT-LT)
9.4 Selection of connection cables, connectors and terminal resistors
→ The homepage of the CC-Link Association (http://www.cc-link.org/)
For specifications, refer to Subsection 9.2.3.
For specifications, refer to Subsection 9.2.3.
For specifications, refer to Subsection 9.2.3.
→ For details on terminal resistors, refer to the homepage of
the CC-Link Association or CC-Link/ LT catalogs.
→ For details on terminal resistors, refer to the homepage of
the CC-Link Association or CC-Link/ LT catalogs.
Model name (manufacturer name)
CL-9-CNF-18
(Mitsubishi Electric System & Service Co.Ltd)
CL9-CNR-23
(Mitsubishi Electric System & Service Co.Ltd)
CL9-CNR-20
(Mitsubishi Electric System & Service Co.Ltd)
→ For details on terminal resistors, refer to the homepage of
the CC-Link Association or CC-Link/ LT catalogs.
Reference
Cable insulator
*1
outside
Cover color
diameter
Light blue -
Green ø 2.1 to 2.4
Yellowish
ø 1.8 to 2.1
green
1
2
3
4
5
6
7
8
9
10
257