Mitsubishi FX3UC SERIES User Manual page 35

FX Series Programmable Controllers
3UC
User's Manual - Hardware Edition
[Input interruption
function)]
Interruption routines
preferentially by external signals with a minimum
ON or OFF width of 5 µs (X000 to X005).
(Timer interruption
interruption functions are also provided.)
→ Refer to "Chapter 5 Input Specifications
and External Wiring","Chapter 7 Examples of
Wiring for Various Uses" in this manual and
[Pulse output function]
Pulses of up to 100kHz can be output
simultaneously to three axes (Y000, Y001 and
Y002).
Programs can be easily created using various
instructions.
→ Refer to Chapter 6 "Output Specifications
and External Wiring " in this manual and the
the Positioning Control Edition.
[Various positioning instructions]
→ Refer to the Positioning Control Edition or
Instruc
tion
Mechanical zero return instruction with
DSZR
DOG search function
Instruction to read the current value
ABS from a servo amplifier with absolute
position (ABS) detecting function
Positioning (relative positioning) to
DRVI specify the movement from the current
position
Positioning (absolute positioning) to
DRVA specify the target position based on an
absolute value 0
Instruction to change the pulse train
PLSV
output frequency
Positioning for fixed-feed interruption
DVIT
drive
Instruction for positioning based on
TBL batch setting of positioning operation,
moving distance and speed
4. Communication and network functions
An expansion board, special adapter or special
function block for each communication function
can be connected.
[Kinds of communication functions]
• Programming communication through RS-
232C, RS-422 and USB
→ Refer to the Data Communication Edition.
• Parallel link
→ Refer to the Data Communication Edition.
• N:N Network
→ Refer to the Data Communication Edition.
function (with delay
can be processed
and high-speed counter
the Programming Manual.
the Programming Manual.
Description
• Computer link
→ Refer to the Data Communication Edition.
• No-protocol communication through RS-
232C/RS-485
→ Refer to the Data Communication Edition.
• Inverter communication
→ Refer to the Data Communication Edition.
• CC-Link
- Master: FX -16CCL-M
2N
- Remote device station: FX
→ Refer to the manual for each product.
• CC-Link/LT
- CC-Link/LT Built-in Master
(Only FX -32MT-LT)
3UC
→ Refer to Chapter 9 in this manual.
- CC-Link/LT Additional Master
(FX -64CL-M)
2N
→ Refer to the manual for each product.
• AS-i system (FX -32ASI-M)
2N
→ Refer to the manual for each product.
5. Analog functions
The special adapter and special function block
for each analog function are connected.
→ For information not provided in the Analog
Control Edition, Refer to the manual of each
[Types of analog functions]
• Voltage/current input
• Voltage/current output
• Temperature sensor input (thermocouple and
platinum resistance thermometer sensor)
• Temperature control
1 Outline
1.1 Major Features
1
2
-32CCL
2N
3
4
5
product.
6
7
8
9
10
29