Contrast - Mitsubishi FX3UC SERIES User Manual

FX Series Programmable Controllers
3UC
User's Manual - Hardware Edition
10.9

Contrast

The liquid crystal display contrast setting is specified at the "Contrast" menu. Selections made at this menu
are saved at D8302. A contrast setting of "0" is specified at factory default.
1) At the menu screen, use the [+]/[-] buttons to move the cursor to the
"Contrast" item, then press [OK] to display the "contrast adjustment
screen".
To cancel the operation and return to the "Main unit I/O operation
display", press [ESC].
2) Use the [+]/[-] buttons to adjust the contrast.
To cancel the operation and return to the "menu screen", press
[ESC].
Button
ESC
-
+
OK
3) Press the [OK] button to register the selected setting and return to the "menu screen".
336
Cancels the operation and returns to the "menu screen".
Lowers the contrast
(decreases the numeric value. The value can be decreased to -5.)
Increases the contrast
(increases the numeric value. The value can be increased to +10.)
Registers the selected setting and returns to the "menu screen".
10 Display Module (Only FX3UC-32MT-LT)
C
C
Operation Description
10.9 Contrast
o n t r a s t
0
( - 5 ~ 1 0 )
o n t r a s t
3
( - 5 ~ 1 0 )