Mitsubishi FX3UC SERIES User Manual page 225

FX Series Programmable Controllers
3UC
User's Manual - Hardware Edition
8.4 Installation Work
8.4.1 Mounting/Removal
1. Mounting method
1) Turn OFF all power supplies connected to the PLC, input/output devices,
and terminal blocks.
2) Align the top side of the "DIN rail mounting groove" (refer to
3) Press the product onto the DIN rail (refer to
2. Removal method
1) Turn the power supply OFF.
2) Disconnect the wiring and input/output cables.
3) Place a flathead screwdriver against the DIN rail mounting hook in the
posture shown (refer to
4) Move the flathead screwdriver in direction shown at right (refer to
right) to detach the DIN rail mounting hook from the DIN rail.
5) Remove the product from the DIN rail.
8.4.2 Input/output cable connection
The terminal block's CN1 and CN2 connectors comply with the MIL-83503 standard.
Input/output cable
at right).
at right)
→ Refer to Section 3.11 for input/output cable information.
Terminal block
8 Terminal Block Specifications and External Wiring
→ Refer to Section 3.2 for installation location.
1
at right)
at
8.4 Installation Work
1
2
3
2
4
5
2
1
6
7
8
9
10
219