Or Special Adapter - Mitsubishi FX3UC SERIES User Manual

FX Series Programmable Controllers
3UC
User's Manual - Hardware Edition
Appendix A-2-4 Cautions on connecting peripheral equipment by way of expansion board

or special adapter.

When connecting peripheral equipment (programming tool or GOT [CPU direct connection]) by way of the
FX -232-BD, FX
3U
CH2) as follows. If the connection channel is not specified with the status below, communication error may
occur in the connected peripheral equipment.
- Set to "K0" the special data register for communication format setting of the channel connecting the
peripheral equipment (CH1: D8400 or D8120, CH2: 8420).
- Set the communication parameter "PLC system [2]" of the channel connecting the peripheral equipment
to "Not set" (as shown in the window below).
-422-BD, FX -USB-BD or FX
3U 3U
A Version Information and Peripheral Equipment Connect ability
-232ADP(-MB), set the connection channel (CH1 or
3U
→ For details, refer to the Data Communication Edition.
A-2 Programming Tool Applicability
Leave this unchecked.
415
11
12
A
B
C
D
E
F