Bus Zone; Sources - GE b30 Instruction Manual

CHAPTER 6: ACTUAL VALUES

6.4.2 Bus zone

ACTUAL VALUES  METERING  BUS  BUS ZONE 1
 BUS ZONE 1

These values display the differential and restraint currents phasors for the bus zone. The magnitudes are displayed in
primary amperes.

6.4.3 Sources

6.4.3.1 Menu
ACTUAL VALUES  METERING  SOURCE SRC 1
 SOURCE SRC 1

This menu displays the metered values available for each source.
Metered values presented for each source depend on the phase and auxiliary VTs and phase and ground CTs assignments
for this particular source. For example, if no phase VT is assigned to this source, then any voltage, energy, and power
values are unavailable.
6.4.3.2 Phase current metering
ACTUAL VALUES  METERING  SOURCE SRC 1  PHASE CURRENT
 PHASE CURRENT
 SRC 1
B30 BUS DIFFERENTIAL SYSTEM – INSTRUCTION MANUAL
BUS 1 DIFF Iad:

0.000 A 0.0°
BUS 1 REST Iar:

0.000 A 0.0°
BUS 1 DIFF Ibd:

0.000 A 0.0°
BUS 1 REST Ibr:

0.000 A 0.0°
BUS 1 DIFF Icd:

0.000 A 0.0°
BUS 1 REST Icr:

0.000 A 0.0°
 PHASE CURRENT

 SRC 1
 GROUND CURRENT

 SRC 1
 PHASE VOLTAGE

 SRC 1
 AUXILIARY VOLTAGE

 SRC 1
 POWER

 SRC 1
 ENERGY

 SRC 1
 DEMAND

 SRC 1
 FREQUENCY

 SRC 1
SRC 1 RMS Ia: 0.000

b: 0.000 c: 0.000 A
See below
See page 6-16
See page 6-16
See page 6-17
See page 6-17
See page 6-18
See page 6-19
See page 6-20
METERING
6
6-15