GE b30 Instruction Manual page 196

PRODUCT SETUP CHAPTER 5: SETTINGS
Figure 5-6: Multiple LANs, with redundancy
5
Multiple LANS, no redundancy
The following topology provides local configuration/monitoring through EnerVista software on LAN1, to which port 1 (P1) is
connected, access to the public network on LAN2, to which port 2 (P2) is connected, and communications with SCADA on
LAN3, to which port 3 (P3) is connected. There is no redundancy.
Figure 5-7: Multiple LANS, no redundancy
5-30 B30 BUS DIFFERENTIAL SYSTEM – INSTRUCTION MANUAL