GE b30 Instruction Manual page 436
Bus differential system
Hide thumbs
Also See for b30:
- Instruction manual (633 pages) ,
- Communications manual (532 pages) ,
- Technical reference manual (252 pages)
Table of Contents
Advertisement
METERING
The metered phase current values are displayed in this menu. The "SRC 1" text gets replaced by whatever name was
programmed by the user for the associated source (see
6.4.3.3 Ground current metering
ACTUAL VALUES METERING SOURCE SRC 1 GROUND CURRENT
6
GROUND CURRENT
SRC 1
The metered ground current values are displayed in this menu. The "SRC 1" text is replaced by the name programmed by
the user for the associated source (see
6.4.3.4 Phase voltage metering
ACTUAL VALUES METERING SOURCE SRC 1 PHASE VOLTAGE
PHASE VOLTAGE
SRC 1
6-16
SRC 1 RMS Ia:
0.000 A
SRC 1 RMS Ib:
0.000 A
SRC 1 RMS Ic:
0.000 A
SRC 1 RMS In:
0.000 A
SRC 1 PHASOR Ia:
0.000 A
0.0°
SRC 1 PHASOR Ib:
0.000 A
0.0°
SRC 1 PHASOR Ic:
0.000 A
0.0°
SRC 1 PHASOR In:
0.000 A
0.0°
SRC 1 ZERO SEQ I0:
0.000 A
0.0°
SRC 1 POS SEQ I1:
0.000 A
0.0°
SRC 1 NEG SEQ I2:
0.000 A
0.0°
SETTINGS SYSTEM SETUP SIGNAL SOURCES
SRC 1 RMS Ig:
0.000 A
SRC 1 PHASOR Ig:
0.000 A
0.0°
SRC 1 PHASOR Igd:
0.000 A
0.0°
SETTINGS SYSTEM SETUP SIGNAL SOURCES
SRC 1 RMS Vag:
0.00 V
SRC 1 RMS Vbg:
0.00 V
SRC 1 RMS Vcg:
0.00 V
SRC 1 PHASOR Vag:
0.000 V
0.0°
CHAPTER 6: ACTUAL VALUES
).
B30 BUS DIFFERENTIAL SYSTEM – INSTRUCTION MANUAL
).
Advertisement
Table of Contents
