Direct Devices Status; Egd Protocol Status; Teleprotection Channel Tests - GE b30 Instruction Manual

CHAPTER 6: ACTUAL VALUES

6.3.16 Direct devices status

ACTUAL VALUES  STATUS  DIRECT DEVICES STATUS
 DIRECT DEVICES
 STATUS
These actual values represent the state of direct devices 1 through 16.

6.3.17 EGD protocol status

6.3.17.1 Fast exchange
ACTUAL VALUES  STATUS  EGD PROTOCOL STATUS  PRODUCER STATUS  FAST EXCHANGE 1
 FAST EXCHANGE 1

These values provide information for debugging an Ethernet Global Data (EGD) network. The EGD signature and packet size
for the fast EGD exchange display.
6.3.17.2 Slow exchange
ACTUAL VALUES  STATUS  EGD PROTOCOL STATUS  PRODUCER STATUS  SLOW EXCHANGE 1(2)
 SLOW EXCHANGE 1

These values provide information for debugging an EGD network. The EGD signature and packet size for the slow EGD
exchanges display.

6.3.18 Teleprotection channel tests

ACTUAL VALUES  STATUS  TELEPROT CH TESTS
 TELEPROT CH TESTS

The status information for two channels is shown here.
B30 BUS DIFFERENTIAL SYSTEM – INSTRUCTION MANUAL
DIRECT DEVICE 1

STATUS: Offline

DIRECT DEVICE 16

STATUS: Offline
FAST EXCHANGE 1

SIGNATURE: 0
FAST EXCHANGE 1

DATA LENGTH: 0
SLOW EXCHANGE 1

SIGNATURE: 0
SLOW EXCHANGE 1

DATA LENGTH: 0
CHANNEL 1

STATUS: n/a
CHANNEL 1 LOST

PACKETS: 1
CHANNEL 2

STATUS: n/a
CHANNEL 2 LOST

PACKETS: 1
VALIDITY OF CHANNEL

CONFIGURATION: FAIL
Range: Offline, Online
Range: Offline, Online
Range: n/a, FAIL, OK
Range: 1 to 65535 in steps of 1
Range: n/a, FAIL, OK
Range: 1 to 65535 in steps of 1
Range: n/a, FAIL, OK
STATUS
6
6-9