Table of Contents
Advertisement
Preface
The registration completion screen will be displayed after registering a user name and password of the
administrator. After 10 seconds, the camera will be reconnected automatically. Please click "here" if it is not
displayed automatically.
When the camera is reconnected to, an authentication window is displayed. Enter the registered user name
and password to start operation.
Viewer software
In order to display H.265 (or H.264) images, send/receive audio to/from the camera, and play images saved
on the SD memory card, the "Network Camera View 4S" (ActiveX
software can be installed directly from the camera or by selecting the [Install] button next to [Viewer
Software] on the menu of the CD-ROM provided, and then following the on-screen instructions.
IMPORTANT
•
The default setting of "Automatic installation" is "On". Follow the instructions on page 232 when the
message is displayed on the information bar of the browser.
•
Depending on the software environment of your PC, it may take time for the message to be displayed
on the information bar of the browser.
•
If you display the "Live" page on a PC and click the [Viewer Software] button, the installation screen
for ActiveX, which is required for viewing camera images, is displayed. Follow the on-screen
4
Operating Instructions
) viewer software must be installed. This
®
Hide quick links:
Advertisement
Table of Contents
