Table of Contents
Advertisement
10 Configure the alarm settings [Alarm]
[Close] button
Click this button to close the "Preset per sender" setup menu.
10.2.2 Configure settings relating to image quality on alarm action
Click "Image compression rate upon alarm detection" of "Camera action on alarm" on the [Alarm] tab of the
"Alarm" page. (®page 101)
[Image compression rate upon alarm detection]
Select "On" or "Off" to determine whether or not to change the image quality of "Quality1" (®page 47) upon
alarm detection.
•
On: Images will be transmitted with the image quality selected for "Image quality upon alarm detection".
•
Off: Does not change the image quality upon alarm detection.
•
Default: Off
[Image quality upon alarm detection]
Image quality can be changed upon an alarm occurrence. Select the image quality from the following.
0 Super fine/ 1 Fine/ 2/ 3/ 4/ 5 Normal/ 6/ 7/ 8/ 9 Low
•
Default: 5 Normal
104
Operating Instructions
Advertisement
Table of Contents
