Panasonic WV-S2500 Series Operating Instructions Manual page 71

Click the [Setup>>] button to display the setup menu that can configure the settings relating to additional info
for detecting alteration. The setup menu will be displayed in a newly opened window. (®page 76)
Recording stream 1/Recording stream 2
[Recording format]
Select the type of image data to be recorded on the SD memory card.
"Off" can only be selected for the "Recording format" of "Recording stream 2".
"JPEG(1)", "JPEG(2)", and "JPEG(3)" can only be selected for the "Recording format" of "Recording stream
1".
•
Off: Does not record data.
•
JPEG(1): Records still image data (JPEG(1)). The data is recorded in accordance with the settings of
"JPEG(1)" on the [Image] tab of the "Image/Audio" page.
•
JPEG(2): Records still image data (JPEG(2)). The data is recorded in accordance with the settings of
"JPEG(2)" on the [Image] tab of the "Image/Audio" page.
•
JPEG(3): Records still image data (JPEG(3)). The data is recorded in accordance with the settings of
"JPEG(3)" on the [Image] tab of the "Image/Audio" page.
•
Stream(1): Records video data (Stream(1)) in the MP4 video encoding format. The data is recorded in
accordance with the settings of "Stream(1)" on the [Image] tab of the "Image/Audio" page.
•
Stream(2): Records video data (Stream(2)) in the MP4 video encoding format. The data is recorded in
accordance with the settings of "Stream(2)" on the [Image] tab of the "Image/Audio" page.
•
Stream(3): Records video data (Stream(3)) in the MP4 video encoding format. The data is recorded in
accordance with the settings of "Stream(3)" on the [Image] tab of the "Image/Audio" page.
•
Stream(4): Records video data (Stream(4)) in the MP4 video encoding format. The data is recorded in
accordance with the settings of "Stream(4)" on the [Image] tab of the "Image/Audio" page.
•
Default:
–
Recording stream 1: JPEG(2)
–
Recording stream 2: Off
IMPORTANT
•
If an SD memory card with an SD Speed Class other than 10 is used, 2048x1536 cannot be selected
for the image capture size of JPEG images. Set the maximum combined bit rate of "Stream(1)",
"Stream(2)", "Stream(3)", and "Stream(4)" selected in "Recording format" to 6 Mbps.
•
If an SD memory card with an SD Speed Class 10 is used, set the maximum combined bit rate of
"Stream(1)", "Stream(2)", "Stream(3)", and "Stream(4)" selected in "Recording format" to 16 Mbps.
•
For SD memory cards with an SD Speed Class 10, use a card that supports UHS-I.
(Ultra High Speed-I)
Note
•
When "Stream(1)" is selected, the settings for "Stream(1)" on the [Image] tab of the "Image/Audio" page
will be changed to the settings for "Stream(1) & recording".
When "Stream(2)" is selected, the settings for "Stream(2)" on the [Image] tab of the "Image/Audio" page
will be changed to the settings for "Stream(2) & recording".
When "Stream(3)" is selected, the settings for "Stream(3)" on the [Image] tab of the "Image/Audio" page
will be changed to the settings for "Stream(3) & recording".
When "Stream(4)" is selected, the settings for "Stream(4)" on the [Image] tab of the "Image/Audio" page
will be changed to the settings for "Stream(4) & recording".
•
When using the SD memory recording function of a Panasonic network disk recorder, select
"JPEG(1)" for "Recording format" of "Recording stream 1".
•
When "Stream(1)", "Stream(2)", "Stream(3)", or "Stream(4)" is selected for "Recording format", the
settings of the following functions may be corrected.
–
When "VBR" is selected for "Transmission priority", "Frame rate" is set.
2 Settings
Operating Instructions 71