Access The Camera Using The Https Protocol (For Ca Certification) - Panasonic WV-S2500 Series Operating Instructions Manual

2 Settings
10.
When accessing with a browser, add the following text for the CN after entering "https://" in the "address"
box.
IMPORTANT
•
When the HTTPS port number is changed from "443", enter "the following text for CN + : (colon) +
port number" in the address box of the browser.
Example of when the port number is "61443":
https://WV-SUD638.0000-0100-450D-0022.panasonic-security-system.net:61443
•
We recommend adding the camera's URL to your browser's bookmark. If you forget the camera's
URL, refer to the hosts file.
11.
When the settings are completed, the color of the background of the address box changes to white. Confirm
that "Website Identification" is displayed after clicking the key mark on the right side of the address bar.
Note
•
If you cannot access with this method it may be because of proxy server settings. Ask the network
administrator.
IMPORTANT
•
When the camera is accessed using the HTTPS protocol, the refresh interval and frame rate of
images may be lower.
2.9.5 Access the camera using the HTTPS protocol (for CA
Certification)
1.
Start up the web browser.
2.
Enter the IP address of the camera in the address box of the browser.
•
Example of entry: https://192.168.0.10/
190 Operating Instructions