Panasonic WV-S2500 Series Operating Instructions Manual page 10

1 Operations
3.
Press the [Enter] key on the keyboard.
→
The "Live" page will be displayed. Refer to page 12 for further information about the "Live" page.
When "On" is selected for "User auth.", the authentication window will be displayed before displaying live
images for the user name and password entries.
IMPORTANT
•
It is recommended to change the password periodically.
•
When displaying multiple H.265 (or H.264) images on a PC, images may not be displayed depending
on the performance of the PC.
Note
•
The maximum number of concurrent access user is 14 including users who is receiving H.265 (or H.
264) images and users who are receiving JPEG images. Depending on the set values for "Bandwidth
control(bit rate)" and "Max bit rate (per client)*", the maximum concurrent access number may be 14
or less users. When 14 users are concurrently accessing, the access limit message will be displayed
for users who subsequently attempt to access. When "Multicast" is selected for "Transmission type" of
"Stream", only the first user who accessed to monitor H.265 (or H.264) images will be included in the
maximum number. The second and subsequent users who are monitoring H.265 (or H.264) images
will not be included in the maximum number.
•
If you set the "Stream transmission" (®page 89) to "On", an H.265 (or H.264) image will be displayed
based on the settings of the "Stream encoding format". If you set the "Stream transmission"
(®page 89) to "Off", a JPEG image will be displayed. A JPEG image can be displayed even if the
"Stream transmission" is set to "On", but in that case, the transmission interval of the JPEG image will
be limited to maximum 5 fps.
•
The refresh interval may become longer depending on a network environment, PC performance,
photographic subject, access traffic, etc.
<Refresh interval of JPEG images>
When "On" is selected for "Stream transmission"
10 Operating Instructions