Frame Rate - Panasonic WV-S2500 Series Operating Instructions Manual

S113x S153x
–
Stream(1): 1920x1080
–
Stream(2): 640x360
–
Stream(3): 320x180
–
Stream(4): 320x180
S111x S151x
–
Stream(1): 1280x960
–
Stream(2): VGA
–
Stream(3): QVGA
–
Stream(4): QVGA
[Transmission priority]
Select a transmission priority for "Stream" from the following.
•
Constant bit rate: H.265 (or H.264) images will be transmitted with the bit rate selected for "Max bit rate
(per client)*".
•
VBR: H.265 (or H.264) images will be transmitted with the frame rate selected for "Frame rate*" while
maintaining the image quality level selected in "Image quality". In this case, images will be transmitted with
the bit rate kept within the maximum bit rate that is set for "Max bit rate (per client)*". The image quality is
fixed, and the recording capacity changes according to the "Image quality" setting and conditions of the
subject.
•
Frame rate: H.265 (or H.264) images will be transmitted with the frame rate selected for "Frame rate*".
•
Best effort: In accordance with the network bandwidth, H.265 (or H.264) images will be transmitted with
the maximum bit rates that are set for "Max bit rate (per client)*".
•
Default: Frame rate
Note
•
When "Frame rate" is set for "Transmission priority", number of users who can access the camera may
be limited.

[Frame rate*]

Select a frame rate from the following.
1fps/ 3fps/ 5fps/ 7.5fps*/ 10fps*/ 12fps*/ 15fps*/ 20fps*/ 30fps*/ 60fps*
•
Default: 30fps*
Note
•
"Frame rate*" is restricted by "Max bit rate (per client)*". For this reason, the frame rate may be lower
than the specified value when any value marked with an asterisk (*) is selected. When "VBR" is selected
for "Transmission priority", depending on the settings of "Max bit rate (per client)*" and "Image
quality", transmission of images may periodically be paused. Check the transmission of images after
changing settings.
•
When the "Image capture mode" is set as "2 mega pixel [16:9](60fps mode)" or "1.3 mega pixel [16:9]
(60fps mode)", Stream(1) is fixed to 60fps. Also, Stream(2) to Stream(4) can select up to a maximum
of 30fps.
[Max bit rate (per client)*]
Select an H.265 (or H.264) bit rate per a client from the following.
64kbps/ 128kbps*/ 256kbps*/ 384kbps*/ 512kbps*/ 768kbps*/ 1024kbps*/ 1536kbps*/ 2048kbps*/ 3072kbps*/
4096kbps*/ 6144kbps*/ 8192kbps*/ 10240kbps*/ 12288kbps*/ 14336kbps*/ 16384kbps*/ 20480kbps*/
24576kbps*
•
Default:
–
Stream(1): 3072kbps*
S15x1 S251x
S253x S223x S213x
S251x S221x S211x
S113x S153x
S221x S211x
S253x S223x S213x
2 Settings
/ 2048kbps*
S111x
Operating Instructions 91