Panasonic WV-S2500 Series Operating Instructions Manual page 74

2 Settings
[Image saving interval/Number of images to be saved(Post alarm)] - [Number of images to be
saved]
Select a number of alarm images to be saved on the SD memory card from the following.
10pics/ 20pics/ 30pics/ 50pics/ 100pics/ 200pics/ 300pics/ 500pics/ 1000pics/ 2000pics/ 3000pics
•
Default: 100pics
Stream recording(Alarm)
This setting is only available when "Stream(1)", "Stream(2)", "Stream(3)", or "Stream(4)", is selected for
"Recording format" of the SD memory card, and "Alarm input" is selected for "Save trigger".
[Pre alarm (recording) duration]
Determine whether or not to perform the pre alarm recording. Set the duration to save image data on the SD
memory card.
Off/ 1s/ 2s/ 3s/ 4s/ 5s/ 8s/ 10s/ 15s/ 20s/ 25s/ 30s/ 40s/ 50s/ 60s/ 90s/ 120s
•
Default: Off
Note
•
The available values change depending on the bit rate and image capture size for "Stream" selected
for recording. As the selected bit rate increases, the available maximum value for the pre alarm
duration decreases.
[Post alarm (recording) duration]
Set the duration to save image data on the SD memory card after an alarm occurrence.
10s/ 20s/ 30s/ 40s/ 50s/ 60s/ 120s/ 180s/ 240s/ 300s
•
Default: 30s
* The actual recording time may sometimes be longer than the duration selected for this setting.
SD memory card warning/error LED
[SD memory card warning/error LED]
Select On/Off to determine whether or not to activate the SD memory card warning/error LED when an SD
memory card warning or error is detected.
SD memory card warning detection conditions: After the total use time has exceeded 6 years and the number
of overwrite times has exceeded 2000
SD memory card error detection conditions: Write error, read error, etc.
•
On: When a warning status is detected, the SD memory card error/error LED turns on. When an error
status is detected, the SD memory card error/error LED starts flashing.
•
Off: Stops detection of warning or error status.
•
Default: Off
SD memory card information
[Remaining capacity]
Total capacity and remaining capacity of the SD memory card will be displayed.
Depending on the status of the SD memory card, the size indications will differ as follows.
74 Operating Instructions
S15x1 S25x1