Panasonic WV-S2500 Series Operating Instructions Manual page 101

•
Off: The color mode is selected.
•
On(IR Light Off)
captured as black & white images.
•
On(IR Light On)
& white images. Suitable when using near-infrared lighting at night.
•
Auto1(IR Light Off)
S11x2 S11x1
& white mode in accordance with the picture brightness (luminance).
•
Auto2(IR Light On)
S11x2 S11x1
& white mode in accordance with the picture brightness (luminance). Suitable when using near-infrared
lighting at night.
•
Auto3(SCC): Suitable to keep the color mode even under darker light condition. The Super Chroma
Compensation (SCC) function retains the color mode even with dim lighting.
•
Default: Auto2(IR Light On)
Auto1(Normal)
S11x2
Super Chrome Compensation (SCC) function
This function achieves faithful color images using the proprietary color compensation technology that
reproduce images even under low illumination where it is usually difficult to capture objects faithfully.
Note
•
Since the color compensation technology is used for "Auto3(Super Chrome Compensation(SCC))",
some colors may look different from the actual objects depending on the light condition (such as when
infrared lights are used).
•
The operating sound might be heard when changing to black-and-white mode, however it does not
indicate any malfunction.
[Level]
S11x2 S11x1
Select the threshold illuminance level (brightness) to switch between the color mode and the black & white
mode. The descriptions about the following threshold illuminance levels are given when "Off" is selected for
"Super Dynamic(SD)".
•
High: Switches from the color mode to the black & white mode when the ambient brightness (illuminance)
of the camera is approx. 2 lx or less.
•
Low: Switches from the color mode to the black & white mode when the ambient brightness (illuminance)
of the camera is approx. 1 lx or less.
•
Default: High
Note
•
When a low value is selected for "Maximum gain", it may be difficult to switch modes depending on the
environment.
[Dwell time]
S11x2
Select a wait time for switching between the color mode and the black & white mode from the following.
2s/ 10s/ 30s/ 1min
•
Default: 10s
[IR LED light intensity]
Select the IR LED light intensity from High/Middle/Low/Off.
•
Default: High
S15x1 S25x1 S22x1
S15x1 S25x1 S22x1
S15x1 S25x1
, WV-S2131: The camera automatically switches between the color mode and the black
S15x1 S25x1
, WV-S2131: The camera automatically switches between the color mode and the black
S15x1 S25x1
, WV-S2131
S11x1
S15x1 S25x1
S11x1 S15x1
S15x1 S25x1
/On
S21x1 S11x2
(excluding WV-S2131): Always captured as black
S21x1
(excluding WV-S2131)/Auto1(Normal)
S22x1 S21x1
(excluding WV-S2131)/Auto2(IR Light)
S22x1 S21x1
S22x1 S21x1
S22x1 S21x1
S25x1 S22x1 S21x1
(excluding WV-S2131)
S22x1 S21x1
, WV-S2131: Always
S11x1
(excluding WV-S2131)/
Operating Instructions
2 Settings
101