2.9.2.5 Configure the HTTPS settings
It is possible to enhance the network security by encrypting the access to cameras using the HTTPS function.
Refer to page 174 for how to configure the HTTPS settings.
[HTTPS - Connection]
Select the protocol used to connect the camera.
•
HTTP: Only the HTTP connection is available.
•
HTTPS: Only the HTTPS connection is available.
•
Default: HTTP
[HTTPS - Select certificate]
Select the certificate to be used with HTTPS.
•
Pre-installed: Select a pre-installed certificate.
•
CA: Select a CA certificate. Only displayed when the CA Certificate is installed.
•
Default: Pre-installed
[HTTPS - HTTPS port]
Designate the HTTPS port number to be used.
•
Available port number: 1 - 65535
•
Default: 443
The following port numbers are unavailable since they are already in use.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 554, 995, 10669, 10670, 59000-61000
[Pre-installed certificate - Download root certificate]
Click the [Execute] button to download the root certificate for the pre-installed certificate. By installing the root
certificate to your PC, you can get signature verification for the pre-installed certificate.
2 Settings
Operating Instructions
169