1 Operations
1.2 Monitor images on a cellular phone/mobile
terminal
1.2.1 Monitor images on a cellular phone
It is possible to connect to the camera using a cellular phone via the Internet and monitor images (JPEG only)
from the camera on the screen of the cellular phone. It is also possible to refresh images to display the latest
image.
IMPORTANT
•
When the authentication window is displayed, enter the user name and password.
To enhance the security, it is recommended to change the password periodically. (®page 147)
•
If the cellular phone in use is not compatible with UTF-8 encode, it is impossible to display the screen
correctly.
•
When "VGA", "QVGA", "640x360", or "320x180" is not selected for either one of "JPEG(1)",
"JPEG(2)", or "JPEG(3)" of [JPEG] on the [Image] tab, images cannot be viewed from cellular phones.
•
Audio is not supported for cellular phones.
Note
•
It is necessary to configure the network settings of the cellular phone in advance to connect to the
Internet and monitor images from the camera. (®page 152)
•
When "Auto" is selected for "Menu language", the screen is displayed in English. If you want the screen
to be displayed in Japanese or Chinese, select "Japanese" or "Chinese" for "Menu language".
(®page 62)
1.
Access to "http://IP address/mobile"
cellular phone.
→
Images from the camera will be displayed.
Refresh control
Press the dial key "5" or the [Manual Refresh] button to refresh the camera images.
20
Operating Instructions
or "http://Host name registered in the DDNS server/mobile" using a
*1
A
B
C