Configuring the HTTPS connection (®page 181)
Select the certificate (®page 175)
Obtain the root certificate (®page 175)
Generation of the CRT key (SSL encryption key) (®page 182)
Generation of CSR (Certificate Signing Request) (®page 183)
Install the CA certificate (®page 184)
Note
•
To use the CA certificate, you need to apply for the approval and the issue of CA certificate by CA.
2.9.3.1 Select the certificate to use when accessing with HTTPS
Select the certificate to be used with HTTPS with [HTTPS – Select certificate].
•
When using a pre-installed certificate: Select "Pre-installed".
When "Pre-installed" is selected, a root certificate (page 175) must be obtained.
•
When using a CA certificate: Select "CA".
Note
•
"CA" can only be selected when a CA certificate has been added. Refer to page 174 for information
on how to add a CA certificate.
2.9.3.2 Obtaining the root certificate
This procedure only needs to be done once for each PC that accesses the camera.
A
B
C
D
E
F
Operating Instructions
2 Settings
175