Table of Contents
Advertisement
2 Settings
2.3.2.4 Alarm: Configure the details for SD memory recording
conditions
The SD memory recording when an alarm is detected is configured in this section.
[Frame rate]
Select a frame rate for the H.265 to be recorded.
Note
•
Refer to [Frame rate*] in "2.3.2.7 Schedule: Set SD memory recording (video recording setup
menu)" for information about available frame rates and the bit rates that are set according to the frame
rate.
[Pre alarm (recording) duration]
Determine whether or not to perform the pre alarm recording. Set the duration to save image data on the SD
memory card.
Off/ 1s/ 2s/ 3s/ 4s/ 5s/ 8s/ 10s/ 15s/ 20s/ 25s/ 30s/ 40s/ 50s/ 60s/ 90s/ 120s
•
Default: Off
Note
•
The values change depending on the bit rate and the image capture size of the recorded stream. As
the selected bit rate increases, the available maximum value for the pre alarm duration decreases.
[Post alarm (recording) duration]
Set the duration to save image data on the SD memory card after an alarm occurrence.
10s/ 20s/ 30s/ 40s/ 50s/ 60s/ 120s/ 180s/ 240s/ 300s
•
Default: 30s
* The actual recording time may sometimes be longer than the duration selected for this setting.
[Next] button
If you click the [Next] button, the mail setup menu will be displayed. (®page 44)
Note
•
If you click the [Next] button, the setting items in the screen are saved.
[Back] button
If you click the [Back] button, the alarm function type setup menu will be displayed. (®page 43)
2.3.2.5 Alarm: configure the mail notifications and mail server
The settings relating to e-mail can be configured in this section.
44
Operating Instructions
Advertisement
Table of Contents
