Table of Contents
Advertisement
Quick Links
Important Information
Network Camera
WV-S2531LTN
Model No.
WV-S2531LN
WV-S2511LN
WV-S2531LN
WV-S2531LN
* For information about the installation tasks, refer to the provided Installation
Guide. For information about how to perform the settings and how to
operate the camera, refer to the Operating Instructions on the provided
CD-ROM.
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
Advertisement
Table of Contents
Related Manuals for Panasonic WV-S2531LN
Summary of Contents for Panasonic WV-S2531LN
- Page 1 Important Information Network Camera WV-S2531LTN Model No. WV-S2531LN WV-S2511LN WV-S2531LN WV-S2531LN * For information about the installation tasks, refer to the provided Installation Guide. For information about how to perform the settings and how to operate the camera, refer to the Operating Instructions on the provided CD-ROM.
-
Page 2: Table Of Contents
Contents Limitation of liability ........................3 Disclaimer of warranty ........................3 Preface ............................4 About notations ..........................4 Main functions ..........................4 About the user manuals ........................ 6 System requirements for a PC ...................... 6 Trademarks and registered trademarks..................7 Copyright ............................ -
Page 3: Limitation Of Liability
IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S). Disclaimer of warranty IN NO EVENT SHALL Panasonic Corporation BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:... -
Page 4: Preface
This allows H.265 compression in addition to conventional H.264 compression technology, and when combined with Smart Facial Coding, reduces data load compared to our previous models. Panasonic's own intelligent auto (iA) feature provides increased discernibility even in environments with poor visibility... - Page 5 *2 For further information about Extension Software refer to our website (http://security.panasonic.com/support/info/). *3 The rain wash coating is only effective against water (rain water) and is not effective against other substances such as oil or damage to the dome cover.
-
Page 6: About The User Manuals
About the user manuals Product documentation is composed of the following documents. • Important Information (this document): Provides basic information about the product. • Installation Guide: Explains installation, mounting, cable connections, and adjusting the field of view. • Operating Instructions (included in the CD-ROM): Explains how to perform the settings and how to operate this camera. -
Page 7: Trademarks And Registered Trademarks
IMPORTANT: • For information on the operation verification of the supported operating systems and web browsers, refer to our website at http://security.panasonic.com/support/info/. • When using a PC that does not meet the above requirements, displaying of images may become slower or the web browser may become inoperable. -
Page 8: Open Source Software
• Refer to the “readme.txt” file on the provided CD-ROM for further information about open source software licenses and the source code. • Please note that Panasonic shall not respond to any inquiries regarding the contents of the source code. -
Page 9: Precautions
Precautions Do not insert any foreign objects. Do not attempt to disassemble or modify Fire or electrical shock may be caused if water this product. or any foreign objects, such as metal objects, Failure to observe this may cause fire or electric enter inside the unit. - Page 10 The screws and bolts must be tightened to [Precautions for use] the specified torque. When the product is accessible from the Failure to observe this may cause a drop Internet resulting in injury or accidents. To prevent unauthorized access, note the fol- lowing.
- Page 11 About the automatic status detection What to do if “WARMING UP-PLEASE function WAIT” appears on the display. When this product malfunctions due to exoge- This message indicates that the temperature nous noise, etc. for 30 seconds or more, the inside the camera has become extremely low. product will automatically reset and will return The camera will be automatically restarted to normal state.
- Page 12 Cleaning of the dome cover LICENSED TO PROVIDE AVC VIDEO. NO When cleaning the dome cover, hose or LICENSE IS GRANTED OR SHALL BE spray fresh water that is not containing IMPLIED FOR ANY OTHER USE. ADDITIONAL lubricant agent or silicon substances and INFORMATION MAY BE OBTAINED FROM wash away adherents such as grain of sand.
-
Page 13: Precautions For Installation
Precautions for installation Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation. For information about the installation tasks, refer to the provided Installation Guide. In order to prevent injury, the product... - Page 14 Heater unit Protection from lightning This product is equipped with an internal heat- When cables are used outdoors, there is a er unit for use in cold climates. The heater unit chance that they may be affected by lightning. turns on automatically when the temperature In such a case, install a lightning arrestor close to the camera, and make the length of the net- inside the product drops below around 0 °C...
-
Page 15: Parts And Functions
Parts and functions 【Whole unit】 * This illustration represents WV-S2531LN Conduit wiring Base bracket connector ( accessory) Attachment plate Enclosure Camera (accessory) Inner cover Fixing screws for attachment Dome cover Panning Camera fi xing plate (accessory) Enclosure fixing Tilting table... - Page 16 ■ Cables cable (category 5e Ethernet or better, straight) RJ45 (female) Network cable 4P alarm cable Alarm input/output cable (accessory) 12 V DC (red) 2P power 12 V DC power GND (black) cable supply terminal (accessory) Audio input cable (white) Audio output cable (black) MONITOR OUT terminal (factory shipment: NTSC monitor)
- Page 17 12 V DC power supply terminal / 2P power cable (accessory) Caution: A READILY ACCESSIBLE DISCONNECT DEVICE SHALL BE INCORPORATED TO THE EQUIPMENT POWERED BY 12 V DC POWER SUPPLY. ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY (UL 1310/CSA 223) or LIMITED POWER SOURCE (IEC/EN/UL/CSA 60950-1).
- Page 18 Alarm input/output cable / 4P alarm cable (accessory) Note: Off, input, and output of the external I/O terminal 2 and 3 can be switched by configuring the setting. Refer to the Operating Instructions on the provided CD-ROM for further information about the EXT I/O terminal 2 and 3 (ALARM IN2, 3) settings ("Off", "Alarm input", "Alarm output"...
- Page 19 When connecting to a network using a PoE hub Before starting the installation, check the entire system configuration. The following illustration gives a wiring example of how to connect the camera to the network via a PoE device (hub). Powered speaker Adjustment monitor PoE device (hub) Ethernet cable...
- Page 20 ■ Indicators and buttons INITIAL SET button (Initializing / NTSC ⇔ PAL switch button) S2531L SD memory card warning/error indicator ACT indicator LINK indicator SD MOUNT indicator SD ERROR/AF indicator WIDE button AF button TELE button S2511L SD memory card slot (SD) SD ON/OFF button INITIAL SET button (Initializing / NTSC ⇔...
- Page 21 SD MOUNT indicator When an SD memory card is inserted and could Lights off → Blinks green → be recognized Lights off When data can be saved after the SD memory card is Lights off → Lights green inserted and the SD ON/OFF button is pressed (less than 1 second) ...
-
Page 22: Insert/Remove An Sd Memory Card
Insert / remove an SD memory card Note: Refer to the Operating Instructions on the provided CD-ROM for further information about the SD memory card settings. ■ Insert an SD memory card 【１】 Remove the enclosure from the camera, insert an SD memory card fully into the SD memory card slot until a click is heard. -
Page 23: Troubleshooting
Use an SD memory card formatted on the camera. Or install the software to format the SD memory card on the PC. Refer to our website (http://security.panasonic.com/support/info/) for fur- ther information about the supported software. • Isn't the inserted SD memory card faulty? - Page 24 Reference Symptom Cause/solution pages • Check the following. • Grounding of the camera, a switching hub or peripheral devices are not done. • The camera is used near an electrical power line. • The camera is used near a device which produces Audio input contains strong magnetic field or radio waves (such as near noise.
-
Page 25: Specifications
Specifications Basic • Power source * DC 12 V PoE (IEEE802.3af compliant) Power consumption * DC 12 V : 750 mA/Approx. 9.0 W PoE DC 48 V : 195 mA/Approx. 9.4 W (Class 0 device) Operating environment Ambient operating temperature: –40 °C to +60 °C * {–40 °F to 140 °F} (Power On range: –30 °C to +60 °C {–22 °F to 140 °F}) - Page 26 Others: Tamper-resistant enclosure *1 Refer to our website (http://security.panasonic.com/support/info/) for further information about Power source and Power consumption information. *2 In the environment where IR-LED is always turned on, make sure that the temperature is between –40° C and +50 °C {–40 °F to 122 °F}.
- Page 27 WV-S2511LN Minimum illumination: Color : 0.008 lx {0.00074 footcandle} (F1.6, Maximum shutter: Off (1/30 s), AGC: 11) 0.0005 lx {0.00005 footcandle} (F1.6, Maximum shutter: max. 16/30 s, AGC: 11)* BW : 0 lx {0 footcandle} (F1.6, Maximum shutter: OFF (1/30 s), AGC: 11, when the IR LED is lit) 0.004 lx {0.00037 footcandle} (F1.6, Maximum shutter: Off (1/30 s), AGC: 11)
- Page 28 WV-S2531LTN 2.3x Optical zoom 6.9x Extra optical zoom is available (when resolution is 640x360). (Motorized zoom / Motorized focus) WV-S2531LN / WV-S2511LN 3.6x Optical zoom WV-S2531LN 10.8x Extra optical zoom is available (when resolution is 640x360). (Motorized zoom / Motorized focus) WV-S2511LN 7.2x Extra optical zoom is available (when resolution is 640x360).
- Page 29 • Network Network: 10BASE-T/100BASE-TX, RJ45 connector Resolution* S2531L H.265/ H.264 2 mega pixel [16:9] (30 fps mode)/ JPEG (MJPEG) 2 mega pixel [16:9] (60 fps mode) 1920x1080, 1280x720, 640x360, 320x180 3 mega pixel [4:3] (30 fps mode) 2048x1536* , 1280x960, 800x600, VGA, 400x300, QVGA S2511L 1.3 mega pixel [16:9] (30 fps mode)/ 1.3 mega pixel [16:9] (60 fps mode)
- Page 30 Up to 16 camera images can be displayed simultaneously on a multi-screen. (Including the camera itself) Compatible SDXC/SDHC/SD Manufactured by Panasonic (SD speed class 4 or higher) memory card* SDXC memory card : 64 GB, 128 GB SDHC memory card : 4 GB, 8 GB, 16 GB, 32 GB...
-
Page 31: Optional Accessories
*6 Refer to our website (http://security.panasonic.com/support/info/) for latest information about the compatible SD memory cards. *7 When repeatedly recording images on an SD memory card using the auto overwrite function, make sure to use an SD memory card with high reliability and durability. - Page 32 For U.S. and Canada: For Europe and other countries: Panasonic Corporation of North America Panasonic Corporation Two Riverfront Plaza, Newark, NJ 07102-5490 http://www.panasonic.com http://business.panasonic.com/ Panasonic Canada Inc. Panasonic Corporation Osaka, Japan 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada 1-877-495-0580 Authorised Representative in EU: https://www.panasonic.com/ca/...