•
If access often fails due to the change in the global address of router, set a smaller value for "Access
interval".
Checking the information registered for the "Viewnetcam.com" service
It is possible to check if the camera has been registered for the "Viewnetcam.com" service. (®page 208)
2.9.6.2 When using "Dynamic DNS Update"
[Host name]
Enter the host name to be used for the Dynamic DNS Update service.
•
Available number of characters: 3 - 250 characters
Enter in the form of "(host name). (domain name)".
•
Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the
hyphen (-).
•
Default: None (blank)
Note
•
Refer to the network administrator for further information about the available host names.
[Access interval]
Select the interval to access the Dynamic DNS Update service server to check the IP address and the host
name from the following.
10min/ 20min/ 30min/ 40min/ 50min/ 1h/ 6h/ 24h
•
Default: 24h
2 Settings
Operating Instructions
195