Monitor Images On A Mobile Terminal - Panasonic WV-S2500 Series Operating Instructions Manual

Press the [Auto Refresh] button to refresh the images from the camera in 5-second intervals.
When the dial key "5" or the [Manual Refresh] button is pressed again, the refresh mode of the camera
will return to manual refresh.
IMPORTANT
•
Transmission will be periodically performed when "Auto Refresh" is selected for the camera
image. Confirm the contract plan of the cellular phone in use before using this function.
•
Depending on the cellular phone in use, "Auto Refresh" may be unavailable.
Resolution control
Changes the image capture size by pressing the dial key "0".
•
Image in the aspect ratio of "4:3": Changes the image capture size between 320x240 (default) and
640x480.
•
Image in the aspect ratio of "16:9": Changes the image capture size between 320x180 (default)
and 640x360.
AUX control
Controls the AUX terminal. These buttons will be displayed only when "AUX output" is selected for
"Terminal 3" on the setup menu. (®page 49)
Note
•
Some cellular phones cannot change the image capture size even when resolution is changed by
resolution control.
•
Depending on the image capture size selected for "JPEG(1)", "JPEG(2)", or "JPEG(3)", "Resolution"
may not be able to be used.
•
When the HTTP port number is changed from "80", enter "http://IP address: (colon) + port number/
mobile" in the address box of the browser. When using the DDNS function, access to "http://Host
*1
name registered in the DDNS server: (colon) + port number/mobile".
•
When "HTTPS" is selected for "HTTPS" - "Connection" on the [Advanced] tab of the "Network" page,
enter as follows.
"https://IP address: (colon) + port number/mobile" or "https://Host name registered in the DDNS server:
(colon) + port number/mobile"
•
When the authentication window is displayed, enter the user name of an administrator or user and
password. Depending on the cellular phone in use, password entry may be required each time the
screen is switched.
•
Depending on the cellular phone in use, larger size images may not be displayed. In this case, selecting
a setting close to the lowest quality setting for "Image quality setting" of "JPEG" (®page 87) may
sometimes solve this problem.
•
Depending on the cellular phone in use or its contract plan, it may be impossible to access.
•
The operations menu displayed on the mobile telephone screen may not be displayed depending on
the user rights and access level of the accessing user. To display the operations menu, it is necessary
to set the user rights and access level ("User auth." in "User mng."). (®page 147)
*1 IP address is the global WAN IP address of the router that can be accessed via the Internet.

1.2.2 Monitor images on a mobile terminal

It is possible to connect to the camera using a mobile terminal via the Internet and monitor images (MJPEG
or JPEG) from the camera on the screen of the mobile terminal. It is also possible to refresh images to display
the latest image.
The compatible mobile terminals are shown as follows. (As of August, 2016)
–
iPad, iPhone (iOS 4.2.1 or later)
–
Android™ mobile terminals
1 Operations
Operating Instructions 21