Panasonic WV-S2500 Series Operating Instructions Manual page 163

[File name]
Enter the file name used for the alarm image to be transmitted to an FTP server. The file name will be as
follows.
File name: ["Entered file name" + "Time and date (year/ month/ day/ hour/ minute/ second)"] + "Serial
number"
•
Available number of characters: 1 - 32 characters
•
Unavailable characters: " & * / : ; < > ? \ |
•
Terminal 1: Transmit the image to the FTP server when an alarm occurs in Terminal 1.
S11x1 S15x1
•
Terminal 2: Transmit the image to the FTP server when an alarm occurs in Terminal 2.
S11x1 S15x1
•
Terminal 3: Transmit the image to the FTP server when an alarm occurs in Terminal 3.
S11x1 S15x1
•
VMD: Transmit the image to the FTP server when motion is detected.
•
Audio detection: Transmit the image to the FTP server when audio detection occurs.
S11x1 S15x1
•
Command alarm: Transmit the image to the FTP server when a command alarm is entered.
[FTP transmission retry]
Select "On" or "Off" to determine whether or not to resend failed FTP transmissions.
•
On: If transmission fails, transmissions are resent until they are successfully sent.
•
Off: If transmission fails, the image that failed to be sent is discarded and the next image is sent.
•
Default: Off
[Pre alarm]
•
Transmission interval
Select the update interval of images before an alarm occurs from the following.
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps
•
Default: 1fps
•
Maximum number of images
Select the number of images to be transmitted from the following.
0pics/ 1pic/ 2pics/ 3pics/ 4pics/ 5pics/ 6pics*/ 7pics*/ 8pics*/ 9pics*/ 10pics*/ 20pics*/ 30pics*/ 40pics*/
50pics*
•
Default: 0 pics
•
Recording duration
The recording duration, which changes according to the configured "Transmission interval" and "Maximum
number of images", of images recorded before an alarm occurs is displayed.
Note
•
When "JPEG(1)" is selected for the capture size of the image to be transmitted, pre alarm is unavailable
if the image capture size of "JPEG(1)" is either "2048x1536" or "1920x1080".
•
When "On" is selected for "Image compression rate upon alarm detection", only post alarm recorded
images are compressed. Compression is not applied to pre alarm recorded images.
•
When a selection with an asterisk (*) on the right of it is selected for "Maximum number of images" of
"Pre alarm", the specified number of images may not be able to be sent depending on the image capture
size and image quality. The following table shows the maximum number of images that can be sent
for pre alarm.
S22x1 S21x1
S25x1
S25x1 S22x1 S21x1
S25x1 S22x1 S21x1
S25x1 S221x S22x1
0 1
S21x0
Image quality
2 3 4 5
2 Settings
S11x2
S11x2
S11x2
S11x2
6 7 8 9
Operating Instructions 163