Drive Oil Diverter Manifold Components (Welder Option) - Genie S-40 Service Manual

February 2014
7-11

Drive Oil Diverter Manifold Components (welder option)

The oil diverter manifold is mounted to the hydraulic generator located in the engine compartment.
Index
No. Description
1 Directional Valve ............................ CY ........... Diverter valve ............................... 80-90 ft-lbs / 108-122 Nm
2 Orifice disc ...................................... CW .......... Delays shift to drive ......................... 35-40 ft-lbs / 47-54 Nm
3 Solenoid valve ............................... CV ........... Pilot valve to diverter ....................... 35-40 ft-lbs / 47-54 Nm
4 Relief valve .................................... CX ........... Charge pressure circuit ................... 35-40 ft-lbs / 47-54 Nm
5 Check valve .................................... CU ........... Prevents oil to generator ................. 35-40 ft-lbs / 47-54 Nm
CU
5
Part No. 826364
Schematic
Item Function
S-40 • S-45 • S-40 TRAX • S-45 TRAX
Section 4 • Repair Procedures
MANIFOLDS
Torque
CY
CW
CV
CX
1
2
3
4
4 - 47