Perform Engine Maintenance - Perkins Models; Check The Oil Cooler And Cooling Fins - Deutz Models - Genie S-40 Service Manual

Section 3 • Scheduled Maintenance Procedures
CHECKLIST B PROCEDURES
B-4
Perform Engine Maintenance -
Perkins Models
Engine specifications require that this procedure be
performed every 250 hours.
Proper engine maintenance, following the engine
manufacturer's maintenance schedule, is essential
to good engine performance and service life. Failure
to perform the maintenance procedures can lead to
poor engine performance and component damage.
• Engine belts - check/adjust
Required maintenance procedures and additional
engine information are available in the
Perkins 400 Series Operation Manual
(Perkins part number TPD 1443S).
Perkins 400 Series Operation Manual
Genie part number
3 - 20
B-5
Check the Oil Cooler and
Cooling Fins - Deutz D2011L03i
Models
Engine specifications require that this procedure be
performed every 250 hours or quarterly, whichever
comes first.
Maintaining the oil cooler in good condition is
essential for good engine performance. Operating a
machine with a damaged oil cooler may result in
engine damage. Also, restricting air flow through
the oil cooler will affect the performance of the
cooling system.
94890
Oil cooler:
1 Remove the safety pin from the engine pivot
Note: The engine pivot plate latch is located under
the engine turntable pivot plate at the counterweight
end of the machine.
S-40 • S-45 • S-40 TRAX • S-45 TRAX
Bodily injury hazard. Do not
inspect while the engine
is running. Remove the key to
secure from operation.
Burn hazard. Beware of hot engine
components. Contact with hot
engine components may result in
severe burns.
plate latch.
October 2014
Part No. 826364