Perform Engine Maintenance - Ford Models - Genie S-40 Service Manual

October 2014
A-16
Perform Engine Maintenance -
Ford Models
Engine specifications require that this procedure be
performed every 200 hours.
• Engine belts - check/adjust
• Fuel filters - check/replace
Required maintenance procedures and additional
engine information are available in the
Ford MSG-425 EFI Operator Handbook
(Ford part number 1020010)
Ford MSG-425 EFI Operator Handbook
Genie part number
To access the engine:
1 Remove the safety pin from the engine pivot
plate latch.
Note: The engine pivot plate latch is located under
the engine turntable pivot plate at the counterweight
end of the machine.
2 Open the engine pivot plate latch and swing the
engine pivot plate out and away from the
machine.
Part No. 826364
215322
S-40 • S-45 • S-40 TRAX • S-45 TRAX
Section 3 • Scheduled Maintenance Procedures
3 - 15