(5)
System Menu Screen
[System Menu]
[Menu End]
[Transfer Mode]
[Maintenance Mode]
Press [Transfer Mode] key to enter transfer mode.
The next screen is displayed.
(6)
Screen Information Transfer Screen
[Transfer Mode]
[Stop]
During transfer, the indication of memory capacity changes.
When the memory indication (XX kbyte) is cleared, press [Stop] key.
Note:
Do not press the [STOP
inclusive 12.11.4 and 12.11.5 will have to be carried out !
The next screen is displayed.
(7)
Waiting for Request to Initialize Flash Memory
Flash memory will be initialized.
Are you sure?
[Yes]
Waiting for Request to Initialize Flash Memory
[Yes]
: Execution of flash memory initialization
[No]
: End (suspension of installation)
Press [Yes].
The next screen is displayed.
Tool –> PT
Screen data
XX kbyte
] key before, or the full installation procedure
[No]
12 - 14