Hitachi 902 Service Manual page 396

Basic Condition for TS Specification
[RUN] (highlighted) is specified for host
Operation Instrument Sample
communication on start condition screen,
Mode Mode Name
[CANCEL] is specified for the transfer of
analytical data alone on the
[communication parameter screen and
[CANCEL] is specified for original Abs.
Simple ID mode Routine New sample (Press the registration key on
analysis sample screen by the number of samples to be
mode analyzed.)
Stat Sample registered for stat TS through
sample screen
Sample No. Routine New sample (Press the registration key on
mode sample screen by the number of samples to be
analyzed.)
Stat Sending is unallowable.
sample
Routine ID mode Routine New sample (Specify the analysis start
analysis sample No. and the number of samples to be
mode analyzed through screen.)
Stat Sample registered for stat TS through
sample screen
Sample No. Routine 1. New sample
mode sample
2. Registered sample
Stat Sending is unallowable.
sample
Supplementary Explanation
1. Basically, text should be transferred with TS and comment presence/absence information added to the same sample information (excluding ID No.) as for inquiry from the analyzer.
Table 16-13 Detailed Information about "SPE: Specification of test slection (from host to anal yzer)"
2 Characters
5 Characters
Function Sample No.
Character
A (Space)
Ignored
D (Space)
Ignored
N 1 to 400
A (Space)
Ignored
D (Space)
Ignored
N 1 to 400
16 - 29
Sample Information, Recommended Character in Parens
1 Character 3 Characters 13 Characters
Unassigned Position No. ID No.
(Space) 1 to 35 Desired ID No.
Ignored (blank
unallowable)
(Space) 2 to 35 Sample and ID
Ignored [Caution 1] No. registered
on screen (blank
unallowable)
(Space) 1 to 35 Desired 13
Ignored characters
(blank
unallowable)
(Space) 1 to 35 Desired ID No.
Ignored (blank
unallowable)
(Space) 2 to 35 Sample and ID
Ignored [Caution 1] No. registered
on screen (blank
unallowable)
(Space) 1 to 35 Desired 13
Ignored characters
(blank
unallowable)
15 Characters
Stop
Unassigned Remarks
Specification
from HOST
(Space) Unallowable [Caution 1]
Ignored The position No. specified from
the host must be within the
range specified on the stat
sample position setting screen.
If the position No. is outside the
range or 0 is specified, sample
information error occurs.
(Space)
Ignored
(Space) Unallowable
Ignored
(Space) Unallowable
Ignored
(Space)
Ignored