System System Baseline Baseline Measurement Measurement - Hitachi U-2810 Instruction Manual

3.4 3.4 System Baseline System Baseline Measurement Measurement
The system baseline can be memorized in the following The system baseline can be memorized in
procedure. procedure.
(1) (1) Make sure th Make sure that there at there is noth
reference side reference side of the
Baseline command from the Spectrophotom Baseline command from the
The window shown in Fig. 3-3 then appears. The window shown in Fig.
Fig. 3-3 Fig.
(2) (2) Select "System" Select "System" and
parameters as shown below and save the baseline. parameters as shown below and save the
Start WL Start WL (nm)
End WL End WL (nm)
Sc Sca a n s n spe
Response Response
WI WI lamp lamp
D2 D2 lamp lamp
3 - 3 3 - 3
is nothing a ing at the t the sample
of the cell cell holder. holder. Then, cl
Spectrophotometer menu.
3-3 then appears.
3-3 Record Record Baseline Baseline
and click click the the OK OK button. button. Set
Parameter Parameter
Setting for Setting for
U-2810 U-2810
(nm) 1100 1100
(nm) 190 190
pee e d ( d (n n m m /m /min in) ) 200 0 20
Medium Medium
On On
On On
the following
sample side side and and
Then, click the ick the Record Record
eter menu.
Set the the
baseline.
3.4 3.4