Text Configuration Table; Text Configuration Corresponding To Contents Of Each Frame - Hitachi 902 Service Manual

16.6 Text Configuration Table

Table 16-9 shows the text configuration corresponding to the contents of each frame.
Text Type Text Item Relevant
Frame
Positive response ANY
Text to indicate
feature of
MOR
communication
Negative response REP
(resending request)
Suspension SUS
request
REC
Analytical data RES
request for specific
sample
Test selection Inquiry request SPE
inquiry text
Test selection Specification SPE
specifying test request
Analytical data Routine, stat and FR1 to END
text control samples
Absorbance data FR1 to END
inentire reaction
process
Photometry-assay END
calibration
ISE calibration END
Supplementary Explanation
1. Table 16-9 shows the text configuration when text size is 512 bytes.
When a text size of 256 bytes is specified for analytical data text, two or more texts may be constituted. So refer to the description concerned.
2. Since there are 4 end-of-data codes besides ETX alone, attention should be paid when setting or referring to a text.
Table 16-9 Text Configuration Corresponding to Contents of Each Frame
Maximum Number Sender
of Characters
4 Analyzer
STX >
Holder
4 Analyzer
STX ?
HOST
4 Analyzer
STX @
HOST
4 HOST
STX A
40 HOST
STX <
40 Analyzer
STX :
Variable HOST
STX :
Variable Analyzer
STX :
Variable Analyzer
STX :
Variable Analyzer
STX :
Variable Analyzer STX :
16 - 24
Contents of Text (Fu: Function character)
ETX BCC
ETX BCC
ETX BCC
ETX BCC
Fu Sample information ETX BCC
Fu Sample information ETX BCC
Fu Sample information Channel count
Fu Sample information Channel count
Fu Sample information Analytical data 1 ... analytical data 4 BLANK1 ... BLANK4 Point count ABS1 ... ABS35 ETX BCC
G Text No. STD count Calibration alarm STD data 1 ... STD data 6
H ISE type Total alarms ISE calibration data ETX BCC
Test selecting Comment presence EXT
information information
Analytical data of 50 tests EXT
SD value information ETX BCC
Reference
Page
BCC
BCC