Hitachi 902 Service Manual page 395

Inquiry Condition
[RUN] (highlighted) is specified for host
Operation Instrument Sample
communication on start condition screen, [NO] is
Mode Mode Name
specified for the transfer of analytical data alone on
the [communication parameter screen and [NO] is
specified for original Abs.
Simple ID mode Routine Press the registration key on the
analysis sample screen by the same times as the
mode sample count for inquiry.
Stat When [RUN] (highlighted) is specified for stat sample
sample test selection, inquiry is made while reading barcode
from the position specified for stat sample position
setting parameter.
Sample No. Routine Press the registration key on the
mode sample screen by the same times as the
sample count for inquiry.
Stat Inquiry is not made.
sample
Routine ID mode Routine Inquiry is made by reading
analysis sample barcodes sequentially from
mode position No. 1.
Stat When [RUN] (highlighted) is specified for stat sample
sample test selection, inquiry is made while reading barcode
from the position specified for stat sample position
setting parameter.
Sample No. Routine Inquiry is made for the specified
mode sample number of samples sequentially
starting from the sample
specified in the analysis start
No. on start condition screen.
Stat Inquiry is not made.
sample
Supplementary Explanation
1. If no response is available from the host within 2 cycles (36 sec) after inquiry to the host, analysis is carried out according to the TS of main frame.
If the main frame has no TS request, the relevant sample will not be analyzed.
Table 16-12 Detailed Information about "SPE: Text for test selecting information inquiry (from analyzer to host)"
2 Characters
Function
Character
Sample A
unregistered
Sample registered
D
Sample N
unregistered
Sample registered
Sample A
unregistered
Sample registered
D
Sample N
unregistered
Sample registered
16 - 28
Sample Information
5 Characters 1 Character 3 Characters
Sample No. Unassigned Position No.
1 to 400 Space 1 to 35
1 to 50 Space 2 to 35
1 to 400 Space 1 to 35
Space Space 1 to 35
Space Space 2 to35
(position Nos.
read by
barcode
reader)
1 to 400 Space 1 to 35
1 to 400
TS: Test selecting information
13 Characters 15 Characters
ID No. Unassigned
ID read with Space Even if a barcode read error occurs due
barcode reader to an unregistered sample, inquiry is
made with position No. assigned.
Same as Inquiry is not made when [NO] is
above specified for full-time inquiry and TS
request lasts 1 channel or more.
Same as Space Same as above
above
ID registered Space Same as above
on screen
[handled as
comment]
ID read with Space Inquiry is not made when an
barcode reader unregistered sample causes barcode
read error.
Same as Inquiry is not made when [NO] is
above specified for full-time inquiry and TS
request lasts 1 channel or more.
ID registered Space Same as above
on screen
When barcode reading is
successful, inquiry is
made via the read ID.
When unsuccessful,
inquiry is made via the ID
specified on screen
ID registered Space Same as above
on screen
[handled as
comment]
Remarks