Table of Contents
Advertisement
6. Select the desired MLK unit to display the Main Menu for the unit. See
Figure 4-24.
Figure 4-24. Typical M
4.4.2. Remotely from a Computer Network Workstation
The M
(MLK) Development System ("Dev Tool") must be loaded onto the
ICROLOK II
workstation being used. TCP-Com must also be loaded and configured to communicate
with the MLK (Refer to Section 4.4.1.1).
1. Navigate to the NimBUS dashboard (or similar server application showing
installed MLK systems) using Internet Explorer.
2. Right-click on the MLK system of interest and select "Dev Tools" from the popup
menu. See Figure 4-25.
3. If the "Dev Tool" is installed on the workstation and TCP-Com is configured
properly and activated, "Dev Tools" will launch automatically, connect to the
selected MLK system, and display the "Dev Tool" main menu. If not, verify that
TCP-Com is installed, configured properly for this application, and activated.
Copyright 2019
Development System Main Menu
ICROLOK II
SM-1H1.0002 Rev. 2, March 2019
TransPortalTM Interlock Monitor
4-24
Advertisement
Table of Contents
