Changing The User Data Of The Connectivity Module - Siemens SIMOTICS CONNECT 400 Operating Instructions Manual

Operation

7.3 Changing the user data of the connectivity module

7.3 Changing the user data of the connectivity module
1. Select the "Settings" menu.
2. Select the "User" submenu.
3. Change the user names. The user name must not comprise more than 26 characters.
4. Change the password in the "Password" field. The password must meet the following
requirements:
– Minimum of 6 characters
– Maximum 26 characters
– At least one uppercase letter (A-Z)
– At least one lowercase letter (a-z)
– At least one numeral (0-9)
– The following special characters are permitted: Hyphens (-) and underscores (_) are
5. Enter the new password again in the "Password (repeat)" field.
6. Confirm your changes by tapping on "Send".
The user data are changed.
54
allowed.
SIMOTICS CONNECT 400
Operating Instructions, 05/2020, A5E50161952A AA