Aastra Dialog 4425 IP Vision User Manual page 76

Operations during a Call
Ô
L3
10
ID. CODE
d í
or
76
Call Parking and Parked Call Retrieving
When you are carrying on a single conversation, you may park the
current call, in order to subsequently retrieve it on a different exten-
sion. For example, this would allow you to change offices without
losing your call.
To do so, whether you are carrying on a conversation using the
handset or handsfree mode:
Settings
WESSON Paul 407
Press a free line key of your extension for which LED is not lit.
Your party is then placed on hold.
Settings
Enter number: 10xx
z
Dial the prefix "10", granting access to the call parking
z
service.
Dial the identification code for the call you wish to park.
This call identification code will be requested later when you retrieve
the parked call. This code is unrestricted, and may consist of 1 or
2 digits, according to your facility's configuration (usually 2 digits).
Call
Press the dynamic function key shown on the left.
A confirmation that the service was accepted is provided both visually
and audibly; the "Accepted Service" message is displayed on the
screen, and the accepted service tone is played.
Hang up the handset, or press the "C" key to end this service
in handsfree mode.
Your extension returns to the idle status.
You may then move about freely, then return to the parked call on
any other extension.
CallList PhoneBook WAP Services
CallList PhoneBook WAP Services
MD Evolution – Dialog 4425 IP Vision
15:49 07 Nov 2008
SMITH Peter
405
Hold Conf/Transf
15:49 07 Nov 2008
SMITH Peter
405
Erase Call