Aastra Dialog 4425 IP Vision User Manual page 120

Voice Mail Services
Ô Õ
Message
PASSWORD
AA DID NO
120
Internal Access for Consulting
Your Voice Mail
Consulting voice messages left in your mailbox is usually carried
out from your extension that was notified.
To do so, from your idle extension:
Simply press your extension's Message fixed function key
that is associated with the voice mail service.
If there are any messages left in your mailbox that you have not yet
heard, the associated LED is lit; it is turned off in the opposite case.
Pressing this Message key issues a call directly to your facility's
integrated voice mail system (the default access number is 884).
A system message therefore prompts you to enter your user
z
password.
Enter your user password.
By default, your user password is "1234", however you may have
modified it. See also the
section.
You are now connected to your mailbox's consultation menu (see
details to follow).
External Access for Consulting
Your Voice Mail
Normally, it is also possible for you to access your voice mail from
an external network using either a DTMF analogue telephone or a
GSM mobile phone that supports the DTMF end-to-end dialling
mode.
Access is then gained through the automated attendant usually
implemented and associated with a system's integrated voice mail,
even when an automated attendant's functions are not effectively
used.
z
Access is gained as follows:
Dial the DID number for your company's automated
attendant (AA).
Usually, the internal number for the automated attendant is 885.
This is associated with DID numbers relating to your facility. Contact
your system administrator for more information.
You are then connected to the automated attendant's voice menu.
"Programming Your Extension's
MD Evolution – Dialog 4425 IP Vision
Services"