Aastra Dialog 4425 IP Vision User Manual page 109

Select
NO STATION
PASSWORD
Select
N times
or
MD Evolution – Dialog 4425 IP Vision
Press the dynamic function key shown on the left.
You then access remote call forward programming.
Input the phone number to forward: <405>
Input the password: <****>
z
Options
Then, dial your own extension number.
To do so, use your extension's keypad, holding each key down for
approximately 2 seconds, and, if necessary, using the "Erase"
option to cancel the last character entered.
Press the dynamic function key shown on the left.
z
Next, enter your user password.
By default, your user password is "1234", however you may have
modified it. See also the
section. Your password is displayed in asterisks.
Press the dynamic function key shown on the left.
The purpose of this is to highlight the "OK" option.
Press the dynamic function key shown on the left.
The third party set displays screens to allow you to select the type
of call forwarding to define. The first screen is illustrated below.
1 Immediate
2 On no reply
3 On busy
4 On no reply or on busy
5 To message
Options
Repeatedly press one of the dynamic function keys shown on
the left in order to highlight the number "n", which
corresponds to the desired call forwarding service.
You may program any type of variable call forward, just as you would
if you were at your own extension (see previously mentioned details).
REMOTE CALL FORWARD
OK
"Programming Your Extension's
REMOTE CALL FORWARD
Call Forwarding Services
BACK
Select
Services"
Select
109