Aastra Dialog 4425 IP Vision User Manual page 140

Group Services
GRP. IN/OUT
GROUP NO
í
140
Dial the prefix to open/close hunt groups.
This varies from one facility to another. You may consult the guide
integrated within your extension in order to find the prefix that has
been defined for this purpose for your facility. See the
z
Your Extension's
Next, dial the internal number for the involved hunt group.
Call
Press the dynamic function key shown on the left.
A confirmation that the service was accepted is provided both
visually and audibly; the "Accepted Service" message is displayed
on the screen, and the accepted service tone is played.
Press the "C" key to end this service.
If the hunt group was previously open to traffic, it then progresses
to a closed status, and will no longer accept calls.
On the other hand, if the hunt group was previously closed to traffic,
it then progresses to an open status, and will now accept calls.
When your primary group is closed, its status is represented on
each member's idle extension with a "C" displayed on the first line
of the screen.
Settings
CS
Managing a possible variable call forward for a hunt group when it
is closed is carried out according to the "Follow me" or "Third Party
Call Forward" procedures (see the
section).
Simply dial the hunt group number instead of the extension number
to forward, and designate the internal call forward recipient as the
extension or hunt group you desire, or the access number for the
voice mail system.
This is carried out without having to enter a user password.
A call forward defined in this manner is only effective when the
involved hunt group is closed.
Services" section.
CallList
Log off
MD Evolution – Dialog 4425 IP Vision
"Programming
PhoneBook WAP Services
15:49 07 Nov 2008
SMITH Peter
405
2 Missed
"Call Forwarding Services"