Aastra Dialog 4425 IP Vision User Manual page 71

Ô
L3
NO TO CALL
Ô Õ
L1
Conf/Transf
MD Evolution – Dialog 4425 IP Vision
To place an enquiry call, whether you are in handset or handsfree
mode:
Press a free line key of your extension for which LED is not lit.
Your extension prompts you to dial the number for the second
internal or external party you would like to reach.
Your first caller is automatically placed on hold, and the key repre-
senting the line on which the first call was placed will flash quickly.
Settings
Enter number: _
z
Dial the number for the new party.
As indicated, you may use any dialling methods otherwise available
when placing a single call.
Call
Press the dynamic function key shown on the left.
You then follow the placement of this call in the same way as for a
single outgoing call.
Settings
FREE
MARTIN Vincent
Supposing that your first call is an internal call, you still have the
same services available to you for placing the second enquiry call
(depending on the second party's status), as you would during a
single call (see also
can:
• Be placed on automatic camp-on if the new calling party's
extension is busy.
• Activate the automatic call-back feature for the new called
extension that is busy, or not answering.
Note: Rather than initially selecting a free line key (for which
LED is not lit, you may press the line key for the current call
(for which the LED is lit).You can also select the "Conf/
Transf" dynamic function key usually displayed on your
extension. The rest of the procedure is carried out as
described.
CallList PhoneBook WAP Services
CallList PhoneBook WAP Services
423
CALL_BACK
"Operations for Outgoing
Operations during a Call
15:49 07 Nov 2008
SMITH Peter
405
Erase Call
15:49 07 Nov 2008
SMITH Peter
405
Calls"). Thus, you
71