Aastra Dialog 4425 IP Vision User Manual page 194

Services Reserved for Attendants
Menu
6 times
Select
ÅÆÇ
194
Managing the Use of the Common Bell
Service
Your telephone facility may feature a common bell to which your
facility's general calls will be directed when they are not answered
by an attendant, or any other user who could possibly assist the
attendants.
This applies in day mode, after a typical timeframe of 60 seconds,
and immediately in night mode (see also the processing of general
calls previously mentioned).
In relation to the previous contexts, your specific rights as an
attendant also include the ability to manage the common bell
service for your facility.
To activate or deactivate the operation of a possible common bell,
from your idle attendant position:
Press the Menu key on your position.
You are granted access to your attendant position's services
programming.
5 Cost consultation
6 General ringing
7 System management
8 Alarm consultation
9 Update password
Options
Press six times the dynamic function key shown on the left in
order to highlight the number "6", which corresponds to the
management of the common bell service.
Press the dynamic function key shown on the left.
If use of the common bell service is not validated – as is the case
when the status "UNACTIVE" is displayed to the right of the
"6 General ringing" option – it becomes validated, and the status
changes to "ACTIVE", and vice versa.
Press and hold the centre navigation key on your extension
for 2 seconds.
Your extension returns to the idle status.
Note: The operation of a possible common bell for your
facility may be managed when your general calls acceptance
status is both inactive and active.
PROGRAMMING
ACTIVE
MD Evolution – Dialog 4425 IP Vision
Select