Aastra Dialog 4425 IP Vision User Manual page 199

2 times
Select
TIME
DATE
MD Evolution – Dialog 4425 IP Vision
Managing the System's Date and Time
Your telephone system's date and time are automatically
maintained for all of the extensions within the facility.
It is possible however, that there could be a slight discrepancy in
the time displayed on your attendant's position. It is also possible
that at times the date displayed is not correct – more particularly on
February 29th in leap years.
In this case, to correct the date and/or time, once the system
management mode accessed:
1 Internal cost
3 Update the system date
5 Reset password
Options
Press twice the dynamic function key shown on the left until
you have selected the "Update the system date" option.
Press the dynamic function key shown on the left.
Your position displays the current system date and time, and
prompts you to enter the correct date and time.
Time (hhmm): <0910>
Date (ddmmyyyy): <15072008>
z
Options
Enter the correct time, according to the format shown.
To do so, using your extension's keypad, hold each key down for
approximately 2 seconds, or use the "Erase" option to cancel the
last character entered.
Press the dynamic function key shown on the left.
z
Enter the correct date, according to the format shown.
SYSTEM MANAGEMENT
UPDATE SYSTEM DATE
Current date: 09:05 - 15/07/2008
OK
Services Reserved for Attendants
2 External cost
4 Short number
6 Incoming calls stats
BACK
BACK
Select
Select
199