Aastra Dialog 4425 IP Vision User Manual page 111

Ô Ö
Call-Fwd
MD Evolution – Dialog 4425 IP Vision
Just as it would if you had defined it from your own extension, your
own extension's Call-Fwd key will flash.
You may then cancel this call forward from your extension, in the
same way as you would for a variable call forward activated directly
from your own extension (see previously mentioned details).
You may also cancel it from the recipient extension, according to
the aforementioned procedure, this time selecting the "7 Cancel
forward" dynamic function.
You may also repeat the procedure from a new recipient extension,
in which case, your calls would follow you as you move from office
to office.
Notes:
The follow me service may also be activated by dialling from
any type of extension (other than an IP H.323 extension). To
activate remote call forwarding, the usual sequence is: 65
<NO> <PSW>, where <NO> is your extension number, and
<PSW> is your user password. To deactivate remote call
forwarding, the usual sequence is: 66 <NO> <PSW>. The
type of call forwarding that is defined is always an immediate
call forwarding. The prefixes "65" and "66" may have been
modified by your system administrator.
In terms of the rights assigned to your extension and each
recipient extension, it is possible that access to the follow
me and remote call forwarding services is restricted.
Therefore, you always have the option of requesting that
a facility attendant define a remote call forward for your
account. See the "Attendant-Based Services" section.
Call Forwarding Services
111