Aastra Dialog 4425 IP Vision User Manual page 47

Erase
STATION NO
Log on
MD Evolution – Dialog 4425 IP Vision
Press the dynamic function key shown on the left.
The extension number for the last user who logged on to the third
party set is deleted, and the extension prompts you to enter your
own extension number.
Settings
User not logged on!
Log on with: _
For SOS calls, dial 9
z
Dial your own extension number.
Press the dynamic function key shown on the left.
You are then prompted to enter your user password, just as if you
were logging on to your own extension (see previously mentioned
details).
If your signature – your extension number and password – is correct,
the third party set now passes to a logged on or unlocked status,
and displays its idle screen with your name and extension number
visible in the central section of the screen.
Now, you may use this extension according to the user profile
associated with your signature. Your user profile includes:
• The repertory keys for your extension, as well as those of
possible additional associated add-on key panels. You will find
the keys programmed identically to those on your own extension,
with status LEDs for either the third party sets or the possible
associated active services.
• Your personal phone book. You will find all of the content in
your personal phone book with the names and associated
numbers, as saved on your own extension.
• All of the service settings that are currently either active or
inactive for your extension. In this way, you will find the status of
your extension in relation to the general call acceptance service
and stand-by mode for the various hunt groups to which your
extension belongs. You will also find your extension settings
concerning possible call forwarding and appointment reminder
services. The displays linked with these services are also dis-
played on the third party set screen or its Call-Fwd (call forward)
key.
Logging on and Logging off Your Extension
CallList PhoneBook WAP Services
15:49 07 Nov 2008
Erase Log on
47