Aastra Dialog 4425 IP Vision User Manual page 103

Ö Ô
Call-Fwd
Ô
Call-Fwd
Ô
Call-Fwd
Ô Õ
Call-Fwd
MD Evolution – Dialog 4425 IP Vision
Cancelling a Variable Call Forward
A temporary variable call forward is shown on your extension by a
flashing Call-Fwd key.
To cancel this call forward:
Simply press the Call-Fwd key on your extension.
The variable call forward is immediately cancelled, and confirmed
to you with the service acceptance tone, and the display of the
"CANCEL ACCEPTED CALL FORWARD" message on your
extension's screen.
This change in status will also cause your extension's Call-Fwd key
to turn off. If you return to your extension's services programming
menu, the "UNACTIVE" status will be also displayed to the right of
the "2 Call forward" option.
Note: As an alternative, you may also access your exten-
sion's variable call forward programming menu, and select
the "7 Cancel forward" option. The result will be the same.
Activating a Call Forward Pre-Defined on
the Call-Fwd Key
You may also pre-define and assign a variable call forward to the
Call-Fwd key on your extension. See the
Extension's Services" section.
This enables you to quickly activate or deactivate a variable call
forward that you use frequently, for example to your secretary.
To activate this pre-defined call forward:
Simply press the Call-Fwd key on your extension, which
initially is turned off.
This pre-defined call forward is immediately activated, and confirmed
to you with the service acceptance tone, and the display of the
"...CALL FORWARD ACCEPTED" message on your extension's
screen.
This change in status will also cause your extension's Call-Fwd key
LED to turn on. In your extension's services programming menu,
the "ACTIVE" status is also displayed to the right of the "2 Call
forward" option.
Call Forwarding Services
"Programming Your
103