Connecting The Machine Via Wireless (Wi-Fi); Easy Setup Using The Wi-Fi Setup Wizard - Ricoh M 2700 Setup Manual

Connecting the Machine via Wireless (Wi-Fi)

To use the machine with a Wireless (Wi-Fi) connection, we recommend setting up the Wireless (Wi-Fi) settings of the machine first, and then
installing the printer driver.

Easy Setup Using the Wi-Fi Setup Wizard

From the control panel of this machine, you can also configure the
Wireless (Wi-Fi) settings for the machine.
The following item is necessary to set up a Wireless
(Wi-Fi) connection.
● Router (access point)
Checking the SSID and Encryption key
The SSID and Encryption key for the router (access point) may be
printed on a label affixed to the router (access point). For details
about the SSID and Encryption key, refer to the router (access point)
manual.
Confirm the SSID and Encryption key, and write them down on the
blank space as shown below.
SSID:
Encryption key:
Configuring Settings Using the Control Panel
● Make sure the Ethernet cable is not connected to the
machine.
1. Check that the router (access point) is working correctly.
2. Make sure the wireless LAN option is attached to the
machine.
For details, see page 6 "Attaching the wireless LAN option".
3. Press the [User Tools/Counter] key.
SSID :XXXXXXXXXXXXX
Encryption key :XXXXXXXXXXXXX
DSG099
DZV451
DZV169
4. Press the [ ] or [ ] key to select [Network Settings], and
then press the [OK] key.
2/3
Print List/Report
Network Settings
Copier Features
5. If you are requested to enter a password, enter the
password using the number keys, and then press the [OK]
key.
Network Set. are Locked
Enter Password
A password for accessing the [Network Settings] menu can be
specified in [Admin. Tools Lock] under [Admin. Tools] menu.
6. Press the [ ] or [ ] key to select [WiFi], and then press the
[OK] key.
Network Settings 1/2
Ethernet
WiFi
IPv4 Configuration
7. Check [WiFi Enable] is selected, and then press the [OK]
key.
WiFi
WiFi Enable
8. Press the [ ] or [ ] key to select [Enable], and then press
the [OK] key.
WiFi Enable
Disable
Enable
9. Turn off the machine and then turn on.
10. Repeat Steps 3 to 5.
11. Press the [ ] or [ ] key to select [Connect Method], and
then press the [OK] key.
Network Settings 2/2
IPv6 Configuration
Connect Method
12. Press the [ ] or [ ] key to select [WiFi], and then press the
[OK] key.
Connect Method
Ethernet
WiFi
Windows
DZV150
DZV151
DZV152
DZV153
DZV154
DZV155
DZV156
7